[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [T3] T3 vs. T1 wheels

To: Type3 <type3@vwtype3.org>
Subject: Re: [T3] T3 vs. T1 wheels
From: Russ Wolfe <russw@classicvw.org>
Date: Fri, 28 May 2004 02:44:07 -0500
In-reply-to: <1d2.22281ac7.2de842ad@aol.com>
List-help: <mailto:type3-request@vwtype3.org?subject=help>
List-post: <mailto:type3@vwtype3.org>
List-subscribe: <mailto:type3-request@vwtype3.org?subject=subscribe>
List-unsubscribe: <mailto:type3-request@vwtype3.org?subject=unsubscribe>
Old-return-path: <russw@classicvw.org>
References: <1d2.22281ac7.2de842ad@aol.com>
Reply-to: type3@vwtype3.org
Resent-date: Fri, 28 May 2004 00:44:58 -0700 (PDT)
Resent-from: type3@vwtype3.org
Resent-message-id: <FVjQfD.A.guW.63utAB@cedant5.abac.com>
Resent-sender: type3-request@vwtype3.org

On Fri, 2004-05-28 at 02:22, K5Dar@aol.com wrote:
> It helps but what do you mean by "ET36" & "ET42"?  These things are real 
> rusty or covered with 37 coats of paint so reading any stamping is impossible.
> 
If you can't get the numbers off the areas where the hub-cap engages the
wheel, then you can measure it with a straight edge off the back of the
wheel to where the wheel contacts the brake drum/rotor when it is
mounted.

-- 
Russ Wolfe
'71 FB AT
'66 FB MT
'65 T1 (not running)
russw@classicvw.org
http://www.classicvw.org

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org

Follow-Ups:
- Re: [T3] T3 vs. T1 wheels
  - From: "Jim Adney" <jadney@vwtype3.org>

References:
- Re: [T3] T3 vs. T1 wheels
  - From: K5Dar@aol.com

Prev by Date: Re: [T3] T3 vs. T1 wheels
Next by Date: Re: [T3] T3 vs. T1 wheels
Previous by thread: Re: [T3] T3 vs. T1 wheels
Next by thread: Re: [T3] T3 vs. T1 wheels
Index(es):
- Date
- Thread