[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Thu, 24 Jun 2004 19:55:28 -0500, Russ Wolfe wrote: >On Thu, 2004-06-24 at 15:57, Mark Healey wrote: >> On Tue, 15 Jun 2004 08:54:09 -0500, Jim Adney wrote: >> >> >On 14 Jun 2004 at 22:11, Mark Healey wrote: >> > > >> >> Spark at the end of plug wires went away so mabey it was intermittent >> to begin with. >> >> Anyway I now have a new distributor cap, rotor and coil. I have a >> real good spark coming out of the coil but when I check at the end of >> the spark plug wire there is nothing. I tried this on #1 and #2 with >> a spare plug. >> >> What could it be now? >> >Are you sure you have the right cap and rotor combination. Not a tall >T-1 cap and a short T-3 rotor?? >How is the carbon brush in the center of the cap?? Is free to move and >make contact with the rotor? >Is the rotor resistance about 5000 ohms? Is the total plug wire >resistance from cap to plug about 1500 ohms? I now have new wires. That was a nightmare. I had to go to three stores to find someone who wouldn't try to sell me the wrong sizes or some tiwanese cheapos. I went to try it and the battery was dead from all the previous attempts. Now I'll have to wait until wednesday to try it again. Mark Healey 71 FI auto square 71 FI manual square marksvw@healeyonline.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org