[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 21 Jun 2004 at 6:16, BOB2TYPE3S@aol.com wrote: > In a message dated 6/20/04 10:59:36 PM Central Daylight Time, > jadney@vwtype3.org writes: > > << On 20 Jun 2004 at 21:42, BOB2TYPE3S@aol.com wrote: > > > You're going to need about 25 feet to do a FI car. > > I think it's more like half that, just because the long runs from front to > rear are all done in steel tube. > > Actually I think the 25 feet came from you a few years back. I know a carbed > car uses about 12 ft to replace everything, and it doesn't have to run to all > the injection pieces (return line, etc...), and this is what he is wanting to > do, replace it all. Okay, I found a writeup I did several years ago and the correct answer is in between our two guesses. I wrote that 19' would do everything on the car, while 10' would do all the pressurized hoses in the rear (68-9 takes a bit less.) It looks like 20' would do everything with plenty to spare. -- Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org