[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 3 Jun 2004 at 11:38, orntar wrote: > Jim Adney wrote: > > >I looked into getting these parts reproduced, but the only place that responded > >said that the mold would cost about $2500, just for the mold. If ISP has done > >this, and gone with a modern rubber compound, this would be a really big > >service to us, and $20 is a very reasonable price to pay for it. > maybe i am confused (very possible), but i thought isp had the overflow > hose a while ago for 50, and cip didn't have it at all. now cip has it > for 20 and i could not find it on isp's site (but that doesn't mean > much, as it is hard to navigate) are they made by the same manufacturer > and then distributed, like new dash pads You're right, I think I'm the one who was confused. I've mixed up ISP and CIP. -- Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org