[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Fri, 2004-07-09 at 00:27, vwsquareback@mycingular.com wrote: > Thanks. Mine were torn and when I removed them today they had alot of play. I seemed to have misplaced one lower balljoint I just hope my lil ones did not throw it in the trash:( Another bind I got myself into is that I removed the tierod ends as I am recieving some new ones soon and forgot to take note how far they are screwed in. Is there a way to get it close enough to be able to drive it to an alignment shop. Thanks again > Joseph 72 squareback AT > You can use a tape measure to set the toe in close enough to get the car to an alignment shop. And a 6" level will get the camber close enough. Take your Bentley with you. The alignment shop may not have the spec's for a 32 yr old car. -- Russ Wolfe '71 FB AT '66 FB MT '65 T1 (not running) russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org