[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Hisham, I'm sorry, as I thought you were talking about the lock cylinder, not
the actual latch. As far as I know, it's a type3 only part. I got to looking
in my Bentley, and it looks like you'll have to remove the side window and the
lower part of the glass run channel, so you can remove the lock sheild/cover.
Once those pieces are removed, then you have 3 screws and 2 linkage rods (one
goes to the inner door pull handle) that need to be removed, then the latch
can fall out of place into the bottom of the door. I think Jim or Russ said a
spring likes to breake in the latch that causes the latch to fail. I hope this
helps.
Bob 65 Notch S w/ Sunroof
71 Square, Now a 2 seat Roadster, pics can be seen
at;http://photo.starblvd.net/bobnotch
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org