[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 23 Feb 2004 at 10:16, Gamboa, Gary wrote: > >The black is steel and the yellow is plastic. > > I recently replaced a leaky injector, when I examined > the bad inj. I was able to twist about 1/2 turn between > these two parts. Interesting. I've never noticed any this loose, but I HAVE taken a couple apart, which required machining away part of the steel housing which is crimped over on the yellow end (under the plastic, where you can't see it.) > I also replaced my other 3 just so I know their good. I > saved my old ones, what's the proper way to store them. I haven't done this yet, but I plan to clean up some of the dirty ones I have here and then store them soaking in kerosene or mineral spirits. Don't use gasoline; it will evaporate too quickly and it's dangerous to keep around. -- Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org