[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 17 Feb 2004 at 9:27, ibjack wrote: > Last week my car grumbled and grinded to a halt. I towed it home thinking > that the tranny was shot. A week later the tranny is replaced with a used > one(thanks Russell C.). I finished the final adjustments and start it up > and the same exact symptoms exsists. I can shift into gears while the > engine is running without using the clutch. The axels turn while the engine > is on and shifter is in neutral. I replaced the shift rod bushing and the > adjusted the clutch properly. The clutch and pressure plate appear to be > good, replaced them about a year ago. The only piece that looks to be > suspect is the trhrow out bearing. I will get a new one. Any thoughts of > what could be wrong? It's a '65 square with a stock 6V swingaxle. Did you take the clutch apart when you had the engine out? I wonder if something just sheared in the driven disk and you didn't see it because you didn't take it apart. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org