[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
I tried checking back but the link is dead. I know all my peices are 311 part numbers... with the possible exception of the end deflector and the elbow. The 180 elbow from the intake of the heater goes into a slightly S shaped tube (not straight) to another unique elbow into the fire wall where it picks up cabin air (3 peices all togeather). The output is a 311 specially shaped elbow that goes into the cabin delivering heat and the deflector goes right into that just as it enters the firewall, 2 peices as you mentioned. The tailpipe is just a little snout that youll have to make anyway as all the original are long rusted out, and the combustion intake is a J tube that reaches under the front frame and up to near the fuel tank. I suppose you could make bug stuff work with some cutting, but it wouldnt line up with stock holes in the firewall. If you can wait till spring I can get all the part numbers when I pull the Square out. Keith > It sure will. The out put snout is 2 piece. The down pipe and the later > plastic cabin directional, these are not bug specific as they serve the same > function in a T3. The intake is a standard "J" and missing the body style > specific section that connects to the cabin. The "J" I would wager has a T3 > PN as well and standard as you mentioned. Key parts missing seem to be the > meeter pump, brackets and cabin to duct (which Im not using) piece. And all > at a good price for now. > > jason > > > This is T1 ducting, it wont fit the T3, except that one large elbow. > > > > Keith > > > > > > > This is a better set with some ducting. I would expect to get 2-3 > > different > > > units to make one good one. > > > > > > > > > http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=46094&item > > =2460778381 > > > > > > jason > > > > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org > >