[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
I rebuild heater boxes by brazing on patches, then you can sandblast them and POR20 them. Now... I havent used POR20 yet but you MUST use it over bare (non-rusted) metal and my complaints with POR were only with using it over rust so I believe this would be a good coating in this application. Keith Keith Park Top Notch Restorations topnotch@nycap.rr.com 71 Squareback 65 Notchback 65 Squareback 87 Golf 88 Rx7 10th Anniversary ----- Original Message ----- From: "Gamboa, Gary" <Gary.Gamboa@sylvania.com> To: "T3 List" <type3@vwtype3.org> Sent: Thursday, December 09, 2004 12:32 PM Subject: RE: [T3] Lower HE's > These HE's are spares I threw in at the sandblaster with alot of > other parts-they are not installed. I had planned to POR-15 them. > I realize they will get oily, but at least the oil will not soak > into the rust and burn off. > > Quater size was a liberal estimation, they are really dime-size > at biggest. > > > Gary > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > >