[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
--- Ben Doughney <ben_d@clear.net.nz> wrote: > on 22/9/2003 1:36 PM, Aaron Clow at > vw_variant71@yahoo.com wrote: > > > I think I'm heading toward working on the > generator > > connections next to make sure they have a good > > contact. Do these look bad? > > It looks to me like the connector on the end of the > D+ wire has been > replaced, so it could be suspect. Has it been > soldered as well as crimped? Hmmmm... Not sure. That's definitely one of the connections I plan to get to. Every connection that was replaced on this car seems to be done as quickly and with as little effort as possible, so if that's not an original connection, I wouldn't be surprised if it's cripmed only, and possibly not well. I'll check it next time I get to work on the car. Thanks! > Also double check the connections on the VR to make > sure they are OK. Before: http://www.tiserves.com/Files/vw/pic10.jpg After: http://www.tiserves.com/Files/vw/pic9.jpg (crimped and soldered) > Try > pushing on the brushes- you might get lucky and find > that one of them is > just stuck. If they stopped working for some reason, would that cause the car to suddenly die? Thanks again! ===== __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org