[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
You may need a reinforcing plate on the floorpan - it's a beefy 1/8" or so thick and maybe 2" x 6", at an angle to spread the load across the pan. Is this fitted to LHD pans, I wonder? I guess the clutch pedal on LHD pans may be over the longitudinal reinforcing section anyway, whereas on RHD it is nearer the tunnel. Proper VW method for adjusting the stop plate position is to use the brake pedal free-play; ie set the stop plate to give a free-play of 1mm between the brake pedal pushrod and M/C. Dave. UK VW Type 3 & 4 Club http://www.hallvw.clara.co.uk/ ------ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org