[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
VW Torsion Bars Standard torsion bars are for recreational and high performance use. Racing torsion bars are designed for maximum performance where maximum wheel travel is needed. Racing bars are not painted to allow magnaflux inspection Sway-A-Way VW torsion bars are made from high tensile aircraft alloy steel, heat treated to military specs and ground to a smooth finish. The spline length on the ends has been increased to strengthen the coupling at each end. Each bar is then painted with a baked-on powder coat finish to prevent rust and corrosion. These heavy duty torsion bars are designed to increase spring rate, reduce suspension bottom out, increase roll stiffness, reduce weight transfer and body roll, and improve ride, handling and cornering ability. Below are suggested applications for VW based cars. Note that these listings are provided here as a starting point. Factors such as tire size, wheel offset, rear trailing arm length, corner weights and shock absorbers will all effect the right choice of length and diameter. Contact your Sway-A-Way Dealer or Sway-A-Way for more application information. VW Torsion Bars Bar Diameter 1100 Series 24 11/16" 24mm 1124 25mm 1125 26mm 1126 27mm 1127 28mm 1128 29mm 1129 30mm 1130 ===== -------------------------------------------- 1971 FI AT Squareback http://www.tiserves.com/VW/ vw_variant71@yahoo.com -------------------------------------------- __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org