[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 22 Oct 2003 at 19:17, Russ wolfe wrote: > On Wed, 2003-10-22 at 15:37, Per Lindgren wrote: > > Mark Fuhriman wrote: > > >Wire #31 I think would have been a ground for a cold start valve. > > > > > 31 is the DIN number designation for ground. See a large list here: > > > > http://66.34.72.138/wiring/defs.html (vintagebus.com) > > > And the wire numbers are here: > > http://classicvw.org/numbers.jpg I think this thread has gotten off track. While a terminal 31 is generally a ground, the OP in this case was asking about a FI wiring harness wire marked with the number 31. In THIS case, this is NOT a ground wire. It is just wire # 31 in the FI wiring harness, which should connect to the starter solenoid (which is not a ground.) -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org