[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [T3] Accelerator cable too long
On 3 Oct 2003 at 9:50, Russ wolfe wrote:
> On Thu, 2003-10-02 at 20:56, Jim Adney wrote:
> > On 2 Oct 2003 at 18:38, Russ wolfe wrote:
> Until VW went to the braided throttle cable, they didnt even use a
> bowden housing on the throttle cable.
Really? Wouldn't that tend to "work" the throttle as the engine/tranny mounts
and the subframe bushings moved?
> What do you recommend when you only have access to 1 length cable and it
> is too long. I have seen catalogs where the only throttle cable they
> list is one length for the T-3.
Check a different catalog, but you're right, it's common to only find one
listed.
I've always been able to find the right cable, but I suspect that one could
shorten a cable by soldering a new sleeve at the right position near the old
end, which you would have to cut off. I don't know how hard it might be to come
up with something suitable for a new sleeve, or if you could drill out the
original and reuse it.
Cables are something I always save from old cars.
--
Jim Adney
jadney@vwtype3.org
Madison, WI 53711-3054
USA
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org