[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 19 Nov 2003 at 19:13, Garret Trask wrote: > Ok, good info! I measured the hole in my muffler, and it flares out: the > outer edge of the flare is about 2 1/8", and the inner edge is about 1 3/4". > So I guess I have a 72-3 muffler, right? You really have to measure the inner bore diameter all the way down inside. Ignore the flange. If that is about 1-3/4, then yes, this can't possibly be the early damper. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org