[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Hi, folks. I've been reading the list for a while just for fun, but now I need some help. I'm finishing up a rebuild of a '69 FI AT Square. Got it running this week, but only on the left side! I can pull the wire on #1 or #2 with no effect. #3 or #4 will kill it. I've got 30psi in the ring. Timing is good (have to advance about 2deg to keep it running with 2 cylinders). I have spark at all four plugs. Brand new injectors, plugs, ignition wires. I had a wiring problem that was keeping 1 and 2 from injecting. Tracked that down, and watched both injectors squirt nicely. Simple tests look like the injectors are still getting voltage after I reinstalled. The wires have been repaired before so I swapped plugs to make sure they weren't mislabeled and injecting in the wrong order. I'm lost - what else do I need to look at? Tony ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org