[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 3 Nov 2003 at 1:34, Mike Wodkowski wrote: > I first measured the resistance of d+ when disconnected from the generator, > with the black lead to GND. In this case DF was connected to the generator. > I got 10-11 ohms. It sounds like you were measuring the resistance between D+ and ground on the VR. I would have expected this to be much higher, but I'll have to check a VR at home tonight. > On my new VR, I just measured with one lead at D+ on the VR and the other at > DF on the VR, and got 18 ohms. I'm not sure what this should give you. Better to measure from each terminal to ground (the body of the VR.) -- Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org