[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 24 Mar 2003 at 11:04, Roush, Norman wrote: > Berg and others sell a hard start relay kit which looks like it consists of a > standard relay and wiring. It should be easy to dupicate if I had the wiring > diagram. It can be used on carb and FI motors as it helps with the voltage loss > in the long iginition switch to starter wire path. Okay, that one. You just remove the wire from the ign switch and connect it to the relay coil, other side of the coil to ground. Then connect the relay contacts from the high current stud on the solenoid to the solenoid input tab. -- Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org