[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
> I saw a web site where someone had cut a hole in the hump. A '69 doesn't have a hump - the bulkhead is fairly flat. The tray on the later ones is spot welded to the 'hump' and the front edge, with a rubber seal between the two about 1/2" above the line of spot welds. Under the dash, the tray side and rear edges are spot welded and seam sealed. I've a stripped front end in the garden so I could take a pic if it helps, but it is a later one than yours. Dave. UK VW Type 3 & 4 Club http://www.hallvw.clara.co.uk/ ------ ------------------------------------------------------------------- List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org