[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 26 Jun 2003 at 21:40, Keith Park wrote: > I have located the correct AMP push on inserts for our FI harnesses... they are > a Euro product only not sold to anyone in the US or anybody but OEM manf in > Europe. > > I can buy them...but the lowest amount I must get is 1250 pieces... $$$ > > SO... if anyone is interested EMail me off list, Im willing to sell a set of 40 > brand new inserts for $5 + $1 Shipping US48 ( I will send overseas for cost). > I think the harness' take about 30 or 35. Again, these are the new crimp on > .110 inserts WITH the locking tab. IF I can get a few interested parties this > will be cost effective to get. Just to clarify, these are the .110" locking female spade connectors, right? Not the connectors for the ECU end of the harness? I have some connectors similar to the former, but I found that the locking tab is in a different location. They work, but don't lock all the way in the connector, so I would be glad to buy a couple hundred of the correct ones. You may have to make REALLY sure that they are the correct ones. Mine looked like perfect replacements until I put them side by side. Of course that only happened when I really needed some! ;-( -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org