[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Wed, 2003-06-18 at 19:54, Shad Laws wrote: > Hello- > > > The Factory inserts for the 10mm studs were .5566-.5585 dia. Part number > > ZVP 107 101. Have 2 sets of them here in front of me. They were made by > > an American company "Keenserts" manufactured by: Tridair Industries, > > Torrence CA. > > Sounds like an oversized 14mm (0.551") insert. Many times, the inserts are > slightly larger than nominal size so that once they go in, they're very hard > to get out. > Actully, they are 9/16-12" (.5580-.5582). Precision tap. these are the inserts that after they are screwed into the case with a special tool, you drive 4 pins in along side the insert. It will never come out. > -- Russ Wolfe '66 FB MT '71 FB AT '65 Bug (not running) russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org