[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
> >> The rotors are clearly the early Type 3 rotors. I checked my Bentley and >> measured the bearing seat ODs and the rotor thickness and everything matches >> up. > >Remember, ALL the bearing bores are the same. The bearing ODs never changed. The thickness measured out to 9.5mm which is the same as listed in the Bentley. My Bentley only lists one thickness (9.5mm) for the rotors. Doesn't list a thicker version. Are the 9.5mm the thicker late rotors? > >> Thanks for all the advice. Anyone have the part numbers for the wheel >> bearings handy? > >for 66, the inner was 311 405 625 > >for all years, the outers are 311 406 645 > >I buy them at a bearing supply house rather than at a VW place. Thanks, I have a bearing supply house just up the road from me. They should be able to get them. They had the bearings for my 6V generator. Later, John Jaranson '71 FI AT Fasty (Jane - Darkside Project) '66 Square (Sophy - Daily Driver) About Half a Late Square (Organ Donor) http://mywebpages.comcast.net/jaransonT3/jaransonT3/ http://mywebpages.comcast.net/jaransonT3/notavwclub/ http://mywebpages.comcast.net/jaransonT3/2004Invasion/ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org