[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Here's the scenario: 62 Type 34 New parts: M/C rebuilt later(73) front calipers new brake lines(front+rear), but not main line thru pan new brake hoses(front+rear) new wheel cylinders I've tried to bleed the system, but can't get pressure to the front calipers. When I loosen the bleeder valves on the front calipers, fluid runs out, but when I pump the pedal, nothing. The rear is bleeding out fine. I've adjusted the push rod to the M/C, but the Bentley states it should not be adjusted from the stock position. Have I installed a bad M/C? It was bench bled. Any other early, single circuit guys out there have this problem when converting to a dual circuit M/C? Help! Doug ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org