[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Yes this can be done in the car. Some exhaust systems require removal in
order to get the lower 6mm bolts to be removed. You need a 30 mm socket for
the crank pulley. Jim A. might have a little more insight on those screws,
when reassembling them. When you get them back in and before you re-install
the fan you might want to silicone plug the screws in place (fill the indent
completely covering the screws), as this will keep them from backing out and
getting into the fan. While you have it apart inspect the fan for grooves and
replace if needed. I hope this helps.
Bob 65 Notch S w/ Sunroof ( buried under snow in the back yard)
69 Square AT-the baby suburban (sitting proudly in the front yard
under a light layer of snow)
-------------------------------------------------------------------
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org