Re: [T3] weber carb question and returning to the list

[BOB2TYPE3S@aol.com]

Jim wrote:
>Finding a nice complete set of Solex dual carbs is also a very viable 
>option, but make sure that you get EVERYTHING.

>I hope some carb people will chime in and list what EVERYTHING consists of.

I guess I can start this, since I have several type3s with carbs. You want 
both a left and right carb, 32 pdsit-2 & -3, two dual port intake manifolds, a 
balance pipe, and gaskets for both ends of the manifolds (stay away from the 
metal ones that come in the gasket kits), air cleaner assembly (this was in the 
pics either yesterday or today, any of these will work), 2 large "O" rings for 
the air cleaner to seal with, 2 idle control solenoids (or passive jets for 
the carbs), 2 short linkage rods, 2 long linkage rods, a throttle linkage 
pivot, and depending on that unit a short connecting rod. I don't think you'll find 
the carb type body to air cleaner connector though. There's probably 
something I've forgotten, but I can't think of it at the moment. I hope this helps.

Bob 65 Notch S w/ Sunroof
       71 Square- now a 2 seat Roadster, under construction

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org