[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 12 Dec 2003 at 18:48, Jason Weigel wrote: > Thanks to Chad hooking me up with this rare tool. Its for the lower nut on > the T3 side draft Solex carb. For those who dont know, its a biznatch to get > the carb off the stock set-up with out one of these tools. I had always > pulled off the entire manifold, which in its self is fun. Everrett has one > and is different. Anyone out there able to shed some light on the > manufacture? Looks like "Paltus" or "Laltus" or even "Jaltus" as the stamp > manufacture. The number code is"P 217". Russ, Jim any clues? It sounds like a Porsche special tool. I just looked it up in my Baum Tool catalog and they jump from P216 to P218. I have a Zelenda catalog at work that I'll try to check to see if they show anything like this. Like Russ says, you can make one up, or there are lots of variation that you can buy and modify. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org