[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
> Thanks to Chad hooking me up with this rare tool. Its for the lower nut on > the T3 side draft Solex carb. In the VW tools catalogue special tool VW178 is for Type 3 carb removal. It's like a double ended 13mm open ended with one end bent at 90 deg to the shaft, and the shaft bent again about 1/3 the way along to give a U-shape with one very short arm. It doesn't look too hard to make. I'll check the pictures when I send, meanwhile here's a copy of the tool in the VW catalogue for Jason. Dave. UK VW Type 3 & 4 Club http://www.hallvw.clara.co.uk/ ------ ----- Original Message ----- From: "Jason Weigel" <notchboy@comcast.net> To: "Type 3 List" <type3@vwtype3.org> Sent: Saturday, December 13, 2003 2:48 AM Subject: [T3] Side draft tool ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org