[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
on 13/12/2003 3:48 PM, Jason Weigel at notchboy@comcast.net wrote: > Thanks to Chad hooking me up with this rare tool. Its for the lower nut on > the T3 side draft Solex carb. For those who dont know, its a biznatch to get > the carb off the stock set-up with out one of these tools. I had always > pulled off the entire manifold, which in its self is fun. Everrett has one > and is different. Anyone out there able to shed some light on the > manufacture? Looks like "Paltus" or "Laltus" or even "Jaltus" as the stamp > manufacture. The number code is"P 217". Can you post the dimensions of it? I would like to make a tool for myself, I have taken the carb off my '65 a few times, using about 3 different spanners, but I always thought that they couldn't have done it that way at the dealer!! Ben Doughney '63 1200 - Ringo '71 1600TL '65 1500N - Val '70 411L Variant http://members.tripod.com/~superkafer/ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org