[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 10 Dec 2003 at 11:26, hisham bakr wrote: > engine out, manual, clutch & press. plate mounted and prefer not to remove > if possible. The fella who sold me the motor had somehow managed to tighten > the fan & pulley without tightening the fan housing. So I need to undo the > fan & pulley.. In this case, the flywheel lock, or the rope in the cylinder, or the tube wrench jammed against the case stud are all good choices. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org