[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [T3] engine to trany nut

To: type3@vwtype3.org
Subject: Re: [T3] engine to trany nut
From: Jim Adney <jadney@vwtype3.org>
Date: Tue, 26 Aug 2003 15:24:22 -0500
In-reply-to: <1061925520.3f4bb290e4e2b@orntar.net>
List-help: <mailto:type3-request@vwtype3.org?subject=help>
List-post: <mailto:type3@vwtype3.org>
List-subscribe: <mailto:type3-request@vwtype3.org?subject=subscribe>
List-unsubscribe: <mailto:type3-request@vwtype3.org?subject=unsubscribe>
Old-return-path: <jadney@vwtype3.org>
Priority: normal
References: <Pine.GSO.3.96.1030826120902.9488C-100000@cedant5.abac.com>
Reply-to: type3@vwtype3.org
Resent-date: Tue, 26 Aug 2003 13:25:00 -0700 (PDT)
Resent-from: type3@vwtype3.org
Resent-message-id: <k9iF7C.A.XCF.UI8S_@cedant5>
Resent-sender: type3-request@vwtype3.org

On 26 Aug 2003 at 15:18, . : orntar : . wrote:

> i could take a lower out for sizing, but does it need to be special grade or 
> anything? i don't need an original?

No special grade required, just the right thread. The same hex size would also 
be useful. You might ask the PO if he has it. Might be no more hassle than 
finding a new one.

-- 
Jim Adney
jadney@vwtype3.org
Madison, WI 53711-3054
USA

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org

Follow-Ups:
- Re: [T3] engine to trany nut
  - From: Russ wolfe <russella@prairieinet.net>

References:
- Re: [T3] engine to trany nut
  - From: Greg Merritt <gregm@vwtype3.org>
- Re: [T3] engine to trany nut
  - From: ". : orntar : ." <orntar@orntar.net>

Prev by Date: Re: [T3] engine to trany nut
Next by Date: [T3] FI tank on a carbed engine
Previous by thread: Re: [T3] engine to trany nut
Next by thread: Re: [T3] engine to trany nut
Index(es):
- Date
- Thread