[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 17 Aug 2003 at 11:02, Russ wolfe wrote: > I use a 1/2" copper solder fitting on mine. I connect the female end to > the fill neck with a very short piece of hose, and a couple clamps. I > then run a piece of 5/8" (16mm) hose from that to the "Tee" inside the > trunk. Do you do anything special to seal around the hose where it passes thru the fender wall? Or did you find a hose that is a tight fit? -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org