[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 28 Apr 2003 at 20:17, Russ wolfe wrote: > An easy way to support the AT trans. while the engine is out, is with a > wire coat hanger. Slip the wire through the upper part of the bell > housing, and through a drain hole that is under the center of the engine > cover rubber seal. Twist the 2 ends together and there you go. When > reinstalling the engine, you can put the engine almost all the way back > in before you have to cut the wire. I use a rope that goes all the way under the bell housing. That way you can put it in place before you start taking things apart. I use a 2x4 across the engine opening to tie the rope over, but the drain holes certainly sound convenient. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org