[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 16 Sep 2002, at 12:29, DAVID WALTERS wrote: > Hey folks, so let me get clear on this: Ive got a fine mesh screen in the > outlet of my gas tank, one equally as fine filter in each of my Weber carbs, > I had a coarser wire mesh filter in my old fuel pump (but that may have > changed when I got a new pump, I'll have to check) and I was running an > in-line automotive glass bodied filter just before the pump. I agree that if you already have all those filters, there is no point in the in-line filter. It just adds weight, clutter, expense, and 2 additional connections into the engine compartment. Bob Hoover points out that it is the added weight of the inline filters (they're heavier when filled with gas) that often contributes to pulling the fittings out of the carbs. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/