[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Tue, 17 Sep 2002 09:06:33 +1200 Ben Doughney <ben_d@clear.net.nz> wrote: > Can I measure 28 deg. by counting the notches > around the fan? I don't have > one of those advance dial timing lights, I > looked around for one but nobody > seems to know what they are down here. This is one for the FAQ files, if there were such a thing... I think this applies to all years: The fan pulley diameter is about 8-5/32 inches. This works out to .071"/deg (1.8mm/deg) along the circumference. Use this relationship to find whatever degree you want around the pulley. If you want 28 degrees, measure out 2" from the TDC mark and put a dab of white paint there (Liquid Paper is handy) so you can see it under the strobe. -Mark Fuhriman ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/