[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 13 Sep 2002, at 10:43, craig.webb wrote: > 1) I know that I need to cut slots in the 'B' pillar. Anyone got any guide > line dimensions for the slot sizes, separation and position on the pillar? The > main thing I'm worried about is getting the slot position wrong and ending up > with a sloppy window which won't seal correctly. You're right, a template with detailed directions would be nice, but I don't recall anyone ever offering such a thing. Perhaps you could find one in a junkyard and do a "rubbing" and take some measurements. > 2) Do I need anymore rubber? I've got the rubber that fixes around the > outside of the window frame. Does anything go around the actual body window > opening? There must be something, otherwise I'll have a gap. Is it something > similar to the trim that goes around the door opening? Yes, there is a trim molding that goes around the inside body opening. I believe I have a good used pair if you can't find one in your scrapyard. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/