[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Jim, Thank you, my stupid manuel had very little to say;, btw, I took your advice about cutting the rubber off the windshied and rear, and it worked out real well and was easily able to remove by myself. Future reference for those how wish to this, a roofers razor knife works great.. thanx again, Robert --- Jim Adney <jadney@vwtype3.org> wrote: > On 7 Sep 2002, at 18:42, Rob Carpenter wrote: > > > the very brief discription in haynes, simply > states > > lower arm, remove clip, lower out window. > > > > Umm ok, well I've tried this and I can't seem to > > remove the clip. I know I could remove the clip If > I > > were more aggresive w/ it, but I would likely > break > > it. > > Here's how I do it: remove window winder and 4 bolts > that hold the window > regulator. Hold window in place while you remove the > regulator by sliding > regulator & clip to the rear and out of the window > lift channel. Remove the > bolts that secure the bottom ends of 2 window > channels. Slide the glass to > the bottom and work it out of the channels and out > of the door. > > - > ******************************* > Jim Adney, jadney@vwtype3.org > Madison, Wisconsin, USA > ******************************* > > ------------------------------------------------ > To unsubscribe, E-mail to: <type3-off@vwtype3.org> > For more help, see http://vwtype3.org/list/ __________________________________________________ Yahoo! - We Remember 9-11: A tribute to the more than 3,000 lives lost http://dir.remember.yahoo.com/tribute ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/