[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 8 Sep 2002, at 21:06, Keith Park wrote: > There is an adjustment screw on the terminal end of the idle cutoffs... > anyone know what this does?? or how it should be properly adjusted?? My lit says this screw was adjusted at the factory and should not be touched. I imagine that it has to do with setting the spring preload so that the valve will open and close with the right voltage, and shouldn't be too hard to set properly. The manual also says that in case of a problem you can turn the screw all the way to the left to make the valve open even in the absence of voltage. You can do this rather than cut off the plunger. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/