[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
-matthias wrote: there is a threaded hole in each manifold, what is it for? there came with the kit (1) alan set screw that seems to fit this hole but there is only 1. the two carbs are the same, not right and left, is this correct? so that one is mounted opposite orientation as the other? there is a hose (nipple?) toward the bottom of the carb that looks like a vacuum hose connection, is this for a balance tube? it came with a hose that seems to be the right width to connect these? Brian Fye probably would be better source of knowledge, but how large is the threaded port in the manifold? It could be balance tube port or... NOS injection port...hehehe ;) Do not use this port for distributor vacuum advance!! The nipple towards the bottom of the carb may be in the correct position to be "ported vacuum", which (if it is) would be the source for your vacuum advance. I am not familiar with ICTs yet, but I am going to look at a friends square this weekend with these carbs on it. I am sure someone else has done this swap and is more knowledgeable. Brian Schlepp 69 Fasty - "Purple Passion" hoping the next heart transplant will include Fuel Injection!! ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/