[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Jim wrote: >>I use a Craftsman ratcheting box end wrench in the 13/16 & 7/8" size. This lets me crank it quickly without realigning the wrench.<< I agree that this is by far the best way to go. I found a 21mm ratcheting box end a few years ago and it really makes the job easy. No more fumbling with that sloppy crescent wrench. BTW, I re-read Muir's procedure for valve adjustment and he mentions pulling out the timing hole plug at the beginning but never says anything about putting it back...hmmm... Scott 62 343, 65 361 ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/