[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-charset iso-8859-1>In a message dated Tue, 3 Sep 2002 2:27:48 PM Eastern Standard Time, jadney@vwtype3.org writes: > You should make sure the little screw which anchors the release lever plate > to the DASH is in place, so that the stress is not taken by the cardboard > glove box itself. Got this right. > > This also allows you to get all the cable stroke you need. > > > The hood is slightly off alignment to the drivers side. > > You should adjust the hood alignment by loosening the bolts on hinges and > moving the hood slightly. Will do this, but I really don't think it is at least all of my problem. > You can pull back the wire and lube the cable. Note that the inner wire is > plastic coated and I have seen that coating break near the housing end and > get caught on that end when you try to pull on the cable. Make sure that it is > not binding now. I think this may be my problem. The plastic coating is not what I am referring to as the sleeve is it? ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/ </x-charset>