Re: [T3] Stock Wheels

[Per Lindgren <lindgre@online.no>]

<x-flowed>

Jim Adney wrote:

> On 31 Aug 2002, at 18:05, Derek Flenniken wrote:
>
> > I measured 4.5" from the inside lip to the inside face of the bolt plate.
> > The wheel measures 5.5" from lip to lip. So that wheel mount plate is offset
> > 1.75" or 44.5mm from the center of the wheel. (1.5mm to center of mount
> > plate perhaps)  That's a T3 wheel then, correct?  Or am I calculating this
> > wrong?
>
> Sounds like you've done this carefully and correctly. I don't think there is any 
> other wheel that these could be, other than type 3 wheels.
But he says that they are 5,5" from lip to lip. The only German 
aircooled rim that was 5,5" wide was the "sport" wheel from 73-up.

PerL


------------------------------------------------
To unsubscribe, E-mail to: <type3-off@vwtype3.org>
For more help, see http://vwtype3.org/list/
</x-flowed>