[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
on 21/10/2002 5:19 PM, Marc Bona at chillz1@angelfire.com wrote: > Is anyone farmiliar with how that little "clamp" (for > lack of a better word) that splices the two cable ends, > that operate the rear seat heat valves, comes undone? > I'm trying to lubricate these valves and the cable > moves freely from the lever by the e-brake, but after > the "splice" it is stuck. I'm sorry if this is a dumb > question, but I can't seem to see how they come apart. > All I see is the two small holes in the "clamp" and I > cannot see an allen screw or a standard screw. Anybody > feel free to reply and insult my intelligence and > birthright ;) They should have a flat head screw in each hole that you can undo. It is probably covered up with dirt and gunk that you might have to dig out to see the screw head. HTH, Ben Doughney '75 1200L '63 1200 - Ringo '71 1600TL http://members.tripod.com/~superkafer/ ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/