[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 17 Oct 2002, at 13:43, HBakr@aol.com wrote: > They are red/orange in color, 10mm I.D. ironically, the old ones were 10mm upper > & 8mm lower eventhough the diameters on both the engine & cooler are 10mm. The > cooler is stamped 311 117 021 B, and the engine is dual press. relief. looking > down the timing pulleys housing I see an oil stain at the round bottom which > confirms your diagnosis as to where its coming from. hisham 70 squirting sq These all sound like the right parts. Some of the seals I've gotten have been pretty stiff, so I have sometimes used a single wavy washer over each fixing bolt as a spacer between the case and the cooler. Normally these came without spacers. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/