Re: [T3] Automatic wiring

[Russ wolfe <russella@prairieinet.net>]

On Mon, 2002-10-07 at 06:57, BOB2TYPE3S@aol.com wrote:

> 
>  Its not that difficult. You need power from the coil (terminal #15) and that 
> goes to one of the terminals of the switch. Then you take the wire on the 
> left side of the trans (on left looking from the rear of the car) and plug 
> that into the other terminal of the switch. Now you're done, thats it. I hope 
> this helps.
> 
Don't forget the fuse holder between the coil and the switch. since
there is no fuse between the ignition switch, and the coil, a short
circuit could take out everything.

-- 
Russ Wolfe
'66 FB MT (It drove)
'71 FB AT 
'65 Bug (not running)
russw@classicvw.org
http://www.classicvw.org



------------------------------------------------
To unsubscribe, E-mail to: <type3-off@vwtype3.org>
For more help, see http://vwtype3.org/list/