[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Mon, 2002-10-07 at 06:57, BOB2TYPE3S@aol.com wrote: > > Its not that difficult. You need power from the coil (terminal #15) and that > goes to one of the terminals of the switch. Then you take the wire on the > left side of the trans (on left looking from the rear of the car) and plug > that into the other terminal of the switch. Now you're done, thats it. I hope > this helps. > Don't forget the fuse holder between the coil and the switch. since there is no fuse between the ignition switch, and the coil, a short circuit could take out everything. -- Russ Wolfe '66 FB MT (It drove) '71 FB AT '65 Bug (not running) russw@classicvw.org http://www.classicvw.org ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/