[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 15 May 2002, at 20:53, Russ wolfe wrote: > In a distributor for carb engines, the spring tension for the vacuum > advance is adjustable. The pin in the dist. body that the spring > attaches to is an excentric. If you turn that pin, you will > loosen/tighten the spring. There is a special tool to do this with, if > needed. I've never worked on one of these, so I was a little reluctant to comment, but I was pretty sure that the return spring should bring the plate all the way back to a hard stop somewhere. Is this true? - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe