[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-rich><fontfamily><param>Arial</param>Hey Drake, Yes you can cut the metal crimp at the top of the injectors off. It's a little bit of a pain but i did it on two of my injectors and then just slid the new fuel line onto where the metal crimp was and placed on the old hose clamp and...wah-laa...fixed injector. later, jesse Drake wrote: Second issue, I noticed that all of the rubber lines on the injectors = are starting to crack. Just right at the edge so far, but I'm going to = want to replace them ASAP. Did I see some time in the past on this list, = someone mentioned that you can cut the metal crimp fitting on the = injector to remove and replace the rubber hose?=20 Drake</fontfamily> </x-rich>