[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 30 May 2002, at 22:35, BOB2TYPE3S@aol.com wrote: > What size drill bit do you use dimple the front upper sway > bar? The one on my Fasty needs to flipped over and dimpled in order > to be able to perform the proper adjustment. Just hold the bits up to the set screw and find one that will make a larger dimple than the face of the set screw. The drill point will also leave a small round central spot which should be smaller than the central flat on the set screw. Don't drill any deeper than you have to. - Jim Adney Madison, WI USA ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/