[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Drake, The floor pan repair is as you suspect. The best way to fix it is to just pull out the panel that is in there and weld in the proper floor pan repair panel (available very cheap through most parts places). Then the repair will look right from top and bottom. The car is 12 volt, and there is a stereo in the glove box. The red knob on the dash is the factory emergency flasher...its original. Ill work on a photo of the pan repair and will add it to the site in the next day or so. I have quite a few folks biting on this car right now...I think it will sell very quickly. The shipping might be just slightly higher than $200...maybe $250, but I had a Beetle shipped down here from San Jose area last year that cost me right around $200. If you want to reach me over the weekend, you can try my cell phone at 714-478-3220. "Cheers!" Randy Carlson TVA Inc. 714-792-3975 http://www.tvaauto.com Drake Lawson wrote: > Wow only 200? I was expecting more for some reason. I am interested in that > bug, actually have been before you put the stripe kit on and raised it. But > Brea is something like a 6 hour drive from here, and I didn't really want to > drive that far to get a car. The car is 12v right? I know there is a stereo > in the glove box, but I just want to make sure. Also do you think you could > send me a pic of pan repair from the inside? From the pic on your site it > looks like the PO just cut a hole in the pan, and then put a piece of sheet > metal in from the top with sheet metal screws. At least that's what it looks > like are poking through the bottom side of the pan. Would it be possible to > take that repair out and simply weld in a section of sheetmetal in the hole > that is already there? > > Oh hey what's the red knob on the dash for? > > Thanks > Drake > > ----- Original Message ----- > From: "Randy Carlson" <bugnbox@earthlink.net> > To: "Drake ." <vw_type3@hotmail.com> > Sent: Thursday, March 28, 2002 1:09 PM > Subject: Re: Delivery Costs? > > > Shipping up to San Jose will be about $200 or so. > > > > Let me know your thoughts! > > > > Cheers! > > Randy Carlson > > http://www.oldbug.com > > 714-792-3975 > > > > "Drake ." wrote: > > > > > Randy, I was just wondering how much the delivery cost would be to > deliver > > > the 66 with the EMPI stipe kit to San Jose, Ca. > > > > > > Thanks > > > > > > _________________________________________________________________ > > > MSN Photos is the easiest way to share and print your photos: > > > http://photos.msn.com/support/worldwide.aspx > > > > > > ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org